Customer Services


Shopping Trolley

in your trolley 0 items



Foamseal Ltd.
New Street House
Petworth
West Sussex
GU28 0AS










Uses For Foamseal?



fitting and sealing
Fitting and Sealing Insulation Boards
If you are using pre-formed insulation material you can use Foamseal to fix the boards in place and increase the insulation value by sealing all gaps. Time can be saved by spraying awkward areas rather than cutting insulation boards to fit.


fitting and sealing
Cold Bridges
Wherever cold bridges occur in normal construction such as lintels, wall plates, sloping ceilings, reveals and soffits. Foamseal is sprayed to eliminate cold spots.



fitting and sealing
Air Leakage/Windows and Door Frames
Use Foamseal to seal and insulate all unwanted openings in the building fabric.




fitting and sealing
Around Pipes
Use Foamseal in plumbing to seal and insulate all gaps around pipes where they penetrate ceilings, walls and floors. Foamseal also minimises the noise from water-rush.



fitting and sealing
Loft Conversions
Foamseal can be sprayed directly onto the underside of roofing felt to insulate or can be used to seal all gaps around pre-formed insulation material, particularly in awkward areas such as dormer cheeks and heads.


fitting and sealing
Flood Protection
Foamseal′s extraordinary adhesive strength and water resistance enable it to be used to protect buildings against flooding. Foamseal can be used to fix and seal pre-cut materials such as plyboard in front of doors, windows, air vents and other areas where floodwater can penetrate.

fitting and sealing
Insulating Sheds and Outhouses
Foamseal sprayed into the inside walls not only insulates but provides a complete moisture barrier too. If a cosmetic finish is required, it can be plastered or covered by any normal batten and board system.



fitting and sealing
Boats and Marine
Foamseal provides excellent water and vapour resistance. It is therefore ideal to fill voids, provide buoyancy, insulate and prevent condensation on hulls and in other areas of high humidity.



fitting and sealing
Insulating Flat and Sloping Ceilings
Uninsulated flat and sloping ceilings can be injected with Foamseal where the cavities are free from obstruction. Seek Foamseal technical advice for interstitial condensation risk.



fitting and sealing

Roofing
Foamseal is used to stabilise loose tiles, fix insulating boards, repair flashings and night seal ongoing construction work.





Click Here to View More Information About Flood Protection


Other Areas of Use
Agricultural Buildings, Insulation & Condensation Control - Tank & Pipe Insulation - Underground Mines, Shaft Sealing - Transport, Reefer Truck & Rail Car Sealing - Pest Control - Solar Water Collectors & Storage - Marine - Flotation - GRP Plugs & Formers - Asbestos Containment - Cold Storage Contracting - Film Set Construction - Theme Park Mouldings - Vibration Damping - Radon Mitigation - Gas Migration.

Continue