Foamseal technical specifications
|Water Vapour Resistivity
|Closed Cell Content
|Flame Spread ASTM E-84
|Smoke Developed ASTM E-84
| Tensile Strength ASTM D-1623
|| 39.3 psi
|| 17.1 psi
|| * 1 year
|| 1 month
| Compressive Strength (ASTMD1621)
|| 14.8 psi
* from date of manufacture
Download pdfs of Foamseal's technical specifications and MSDS sheets
Polymeric Isocyanate, Polyol Resins and HFC propellant.
For information, call: 01798 345400.
Weight, Dimensions and Yield
Weight: 18Kgs. Dimensions: 430mm x 394mm x 200mm
Yield: Approx. 18m2 @ 25mm depth (equivalent to 0.47m3)
Weight: 2x boxes weighing 26.55Kgs. Dimensions: 2x boxes of 435mm x 320mm x 320mm
Yield: Approx. 56m2 @ 25mm depth (equivalent to 1.4m3)
Class 1 Surface Spread of Flame (ASTM E- 84)
Foamseal contains fire retardants. However in common with all organic materials it is
combustible and extreme caution should be taken with the use of naked flames. In essence
it is more difficult to ignite than, say, wood, but in a fire situation it will burn and, as with all
organic materials, give off toxic fumes.
Although Foamseal has a nominal density of 1.5 pcf, the density tends to rise to 2.0 pcf or
more if used in confined areas.
The foam adheres to most substrates except materials such as Teflon, silicone and
polyethylene. Foam also adheres to itself, allowing layers to build up to desired thickness.
Please carefully read and strictly adhere to the directions, warnings and cautions given.
The user assumes all risk as to the use of the product. Failure to follow all instructions,
directions, warnings and cautions shall release The Company from any and all liability.
This product is warranted to be free from defects. The Company shall not be liable for any
consequential or other damage or remedy; its sole obligation and your exclusive remedy are
limited to product replacement. There are no warranties which extend beyond the description
on the face of hereof.